Contact
Phone:
Mobile:
E-Mail:
Education
| 2004–2009 | Higher Technical Education Institute (HTL) Graz-Gösting / education focus on plant technology |
| 2010–2015 | Bachelor’s degree program in Metallurgy, University of Leoben, Austria (BSc) |
| 2015–2016 | Master’s degree program in Metallurgy, University of Leoben, Austria, with focus on Nonferrous Metallurgy, Iron and Steel Metallurgy and Heat Technology |
| 2016 | Graduation (Dipl.-Ing.) Topic: Kinetic studies on the reduction of electric furnace slag in the primary copper production |
| 2021 | Conferral of doctorate (Dr.mont.) Topic: Behaviour of aluminium-containing residues and low-grade aluminium scrap during recycling including special metals |
Professional experience
| 2016–present | PhD student and research associate at Institute of Nonferrous Metallurgy, University of Leoben, Austria |
PhD Thesis
Title: Recycling of aluminum with special consideration of special metals
Concerning the aluminum recycling process there are hardly any studies on the behavior of special metals during the individual process stages. The main focus of this work consider the elements of the rare earths – especially scandium, since its effect in aluminum is positive, but the price is (still) very high. Furthermore, special metals such as gallium and indium, which are in the third main group of the periodic table, as well as lithium, which is undesirable in recycling due to contamination of the metal and uncontrollable dross formation, are of interest in this research project. In particular, the sources of these elements and the distribution between metal and dross or salt slag phase should be investigated.
Publications
Antrekowitsch J., St. Wibner and G. Hanke: Hydrogen, a Promising Carbon Substitute in Metallurgy?, Advances in Pyrometallurgy – Developing Low Carbon Pathways, TMS Annual Meeting 2023, 27-34
Scheiblehner D., Antrekowitsch H., Neuschitzer D., Wibner S. and Sprung A: Hydrogen Production by Methane Pyrolysis in Molten Cu-Ni-Sn Alloys. Metals, 13 (2023), 1310.
Tichy S., Pucher P., Prillhofer B., Wibner S. and H. Antrekowitsch: Hydrogen Absorption of Aluminum-Magnesium Melts from Humid Atmospheres. TMS Light Metals (2023), San Diego, USA, 920–927
Tichy S., Pucher P., Prillhofer B., Wibner S. and H. Antrekowitsch: Comparison of experimental methods to investigate the oxidation behaviour of aluminium melts. EMC proceedings (2023).
Scheiblehner D., D. Neuschitzer, S. Wibner, A. Sprung and H. Antrekowitsch: Hydrogen production by methane pyrolysis in molten binary copper alloys. International Journal of hydrogen energy (2022), online, Print 2023
Wibner S., D. Neuschitzer, D. Scheiblehner and H. Antrekowitsch: A Brief Insight – Methanpyrolyse im Flüssigmetallreaktor. Insight Energy (2022), 6, 68–70
Wibner, S.: Recycling of aluminium-containing residues. European Metallurgical Conference (2021), Salzburg, Österreich, 2021
Wibner S. uand H. Antrekowitsch: Recycling of aluminium-containing residues. Proceedings of European Metallurgical Conference (2021), Salzburg, Österreich. (online)
Wibner S., H. Antrekowitsch and T. C. Meisel: Studies on the Formation and Processing of Aluminium Dross with Particular Focus on Special Metals. Metals, 11 (2021), 1108.
Wibner S. and H. Antrekowitsch: Recycling von Al-Schrotten mit hohem Organikanteil, Recy & DepoTech (2020), Leoben, Austria, 113–118
Wibner S. and H. Antrekowitsch: Aufarbeitung von Reststoffen aus der Aluminium-Industrie. Mineralische Nebenprodukte und Abfälle 7 (2020), Berlin, Germany, 296–309.
Wibner S. and H. Antrekowitsch: Comparison of two dross press systems in the aluminum recycling industry. Proceedings of SIPS (2019), Vol. 4, Paphos, Cyprus, 109–117.
Wibner S., H. Antrekowtisch and B. Falkensammer: Representative Sampling, Fractionation and Melting of Al-Scrap. TMS Light Metals (2020), San Diego, USA, 1083–1090.
Wibner S. and H. Antrekowitsch: Recycling of aluminium with variation of the scrap processing techniques. Proceedings of European Metallurgical Conference (2019), Düsseldorf, Germany, 1151– 1161
Ebner T., C. Sagadin and S. Wibner: Hauptexkursion des Lehrstuhls für Nichteisenmetallurgie der Montanuniversität Leoben 2018. Erzmetall World of Metallurgy, Vol.71, (2018) No.6, 344–346
Steinacker S., Antrekowitsch J., Wibner S. and C. Wibner: Copper Recovery from Sulfidic Particles in Electric Furnace Slag. World of Metallurgy – Erzmetall 69 (5/2016), 261–268
Presentations
Wibner S.: Pilot Plant for Hydrogen and Carbon Production via Methane Pyrolysis. SIPS 2023, Veracruz, Panama, 2023
Wibner S.: Processing of aluminium dross from the Al-recycling industry. Materials Science and Engineering, Darmstadt, Deutschland, 2022
Wibner S.: Processing of dross from the aluminium industry. Light metals expert committee, Urspelt, Luxemburg, 2022
Wibner S.: Recycling von Al-Schrotten mit hohem Organikanteil, Recy & DepoTech, Leoben, Austria, 2020
Wibner S.: Representative Sampling, Fractionation and Melting of Al-Scrap. TMS 2020, 149th Annual Meeting & Exhibition, San Diego, USA, 2020
Wibner S.: Aufarbeitung von Reststoffen aus der Aluminium-Industrie. Konferenz Mineralische Nebenprodukte und Abfälle, Berlin, Germany, 2020
Wibner S.: Comparison of two dross press systems in the aluminum recycling industry. Sustainable Industrial Processing Summit and Exhibition, Paphos, Cyprus, 2019
Gerold E., D. Hofer und S. Wibner: Optimization of a leaching process for pulverized metal-containing residues. SIPS 2019 – Sustainable Industrial Processing Summit and Exhibition, Paphos,
Cyprus, 2019
Wibner S.: Einfluss der Schrottvorbehandlung auf die Krätzebildung. Jahrestagung des Leichtmetall-Fachausschusses, Langenbruck, Germany, 2019
Wibner S.: Recycling of aluminium with variation of the scrap processing techniques. European Metallurgical Conference, Düsseldorf, Germany, 2019
Posters
Wibner S. and H. Antrekowitsch: Scrap processing in Al recycling. European Metallurgical Conference, Düsseldorf, Germany, 2019
Wibner S.: Determination of the amount of dross depending on the pre-treatment of the feedstock. Metal 2019, Brünn, Czech Republic, 2019
Wibner S.: Determination of free aluminum content in dross by using liquid salt slag in a TBRC. Metal 2018, Brünn, Czech Republic, 2018
Wibner S.: Prozessoptimierung beim Al-Recycling. WerWasWo.Forschung@MUL, Leoben, Austria, 2017
