Contact
Phone:
Mobile:
E-Mail:
Education
1989–1994 | Higher Technical Education Institute (HTL) Leoben / Concentration: Metallurgy |
1994–1998 | First part of studies: Metallurgy, at University of Leoben, Austria |
1998–2000 | Second part of studies: Nonferrous Metallurgy, at University of Leoben, Austria |
2000 | Graduation with distinction (M.Sc.)/(Dipl.-Ing.) Topic: Hydrometallurgical treatment of zinc containing dusts from steel industry |
2004 | Conferral of doctorate with distinction (Dr. mont.) Topic: Treatment of zinc containing dusts with special focus on the halogen problem |
2010 | “venia docendi” (Priv.-Doz.) in the field of metallurgy of nonferrous metals” Topic: Recycling of heavy metal containing wastes |
Professional experience
1998–2000 | Employeeat Institute of Nonferrous Metallurgy, University of Leoben, Austria |
2000 | Employee at Christian Doppler Laboratory for Computer-aided Applied Thermo Fluid Dynamics |
2001–2004 | PhD student and scientific staff at Institute of Nonferrous Metallurgy, University of Leoben, Austria |
2002–present | Part-time contract teacher at the HTL Leoben, Department of Metallurgy and Materials Technology |
2005–present | Research associate at Institute of Nonferrous Metallurgy, University of Leoben, Austria |
2011–2018 | Head of Christian Doppler Laboratory for Optimization and Biomass Utilization in Heavy Metal Recycling |
2018–present | Responsible for the area of “Recycling of metallurgical by-products” and the COMET project “Commby” |
Publications
Wölfler C., Hanke G., Antrekowitsch J. : Modification of heavy metal containing slags for use as sand substitute in concrete. EMC proceedings (2023)
Wölfler C., Hanke G., Antrekowitsch J. : The use of treated lead slag as a substitute for natural sand in concretes. WASTES: Solutions, Treatments and Opportunities IV (2023), Coimbra, Portugal, 355-360
Antrekowitsch J., St. Wibner und G. Hanke: Hydrogen, a Promising Carbon Substitute in Metallurgy?, Advances in Pyrometallurgy – Developing Low Carbon Pathways, TMS Annual Meeting 2023, 27-34
Dornig Ch., J. Antrekowitsch: Evaluation and characterization of biochar for use in metallurgical aggregates, EMC 2023, online-proc.
Kleeberg, C., L. Cattini,, T. Kremmer. und J. Antrekowitsch: Characterisation of Secondary Copper Smelting Slag With Transmission Electron Microscopy. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 54B.2023, 3, S. 1593-1603
Antrekowitsch J. and G. Hanke: Efficient steel mill dust recycling – Aiming for zero waste.
Rewas 2022 – Developing tomorrow‘s technical cycles (2022), Anaheim, Kalifornien, USA, 303–310
Antrekowitsch J. and G. Hanke: Verwertung von Schlacken aus dem Recycling metallurgischer Nebenprodukte, Mineralische Nebenprodukte und Abfälle (2022), 9, 304–315
Auer M., C. Wölfler and J. Antrekowitsch: Inflluence of different carbon content on reduction of zinc oxide via metal bath. Applied Sciences (2022), 12, 2, 4180
Brandner U., M. Leuchtenmüller, F. Hoffelner and J. Antrekowitsch: A tailor – made experimental setup for thermogravimetric analysis of the hydrogen- and carbon monoxide- based reduction of Iron(III) oxide (Fe2O3) and zinc ferrite (ZnOFe2O3). TMS – 151st Annual meeting and Exhibition supplemental proceedings (2022), Anaheim, Kalifornien, USA, 917–926
Hanke G. and J. Antrekowitsch: Verwertung von Schlacken aus dem Recycling metallurgischer Nebenprodukte. Mineralische Nebenprodukte und Abfälle (2022), 9, 305–314
Hanke G., J. Antrekowitsch, F. Castro and H. Krug: Maximizing the efficiency of by-product treatment by multi-metal recovery and slag valorization. Rewas 2022 – Developing tomorrow‘s technical cycles (2022), Anaheim, Kalifornien, USA, 201–211
Hanke G. and J. Antrekowitsch: Assessment of by-products from metal producing industry – Development of a certification procedure and case study “Dust from Secondary Copper Industry“. SIPS (2022), Phuket, Thailand
Kleeberg C., L. Cattini, T. Kremmer and J. Antrekowitsch: Characterisation of secondary copper smelting slag with transmission electron microscopy. Metallurgical Transactions B
Antrekowitsch J., C. Dornig and G. Hanke: Pyrolyzed biomass for CO2-neutral reduction processes. Proceedings of European Metallurgical Conference (2021), Salzburg, Österreich (online)
Auer M., J. Antrekowitsch, B. Voraberger, K. Pastucha, U. Dieguez Salgado: 2sDR – the future solution for steel mill dust recycling, Proceedings of European Metallurgical Conference (2021), Salzburg, Österreich (online)
Brandner U., J. Antrekowitsch and M. Leuchtenmueller: A review on the fundamentals of hydrogen-based reduction and recycling concepts for electric arc furnace dust extended by a novel conceptualization, International Journal of Hydrogen Energy Volume 46 Issue 62 (2021), 31894-31902
Hanke G., J. Antrekowitsch and T. Wiessler: COMMBY – Developing Strategies for the Evaluation and Certification of Metallurgical By-products. Proceedings of 11th European Metallurgical Conference – EMC.(2021)
Leuchtenmueller M., C. Legerer, U. Brandner U. and J. Antrekowitsch: Carbothermic Reduction of Zinc Containing Industrial Wastes: A Kinetic Model, Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science (2021), 548-557
G. Hanke, J. Antrekowitsch and T. Wiessler: Charakterisierung von Nebenprodukten der metallurgischen Industrie – der erste Schritt zur Zertifizierung Berliner Konferenz mineralische Nebenprodukte und Abfälle 7,232-243, 2020
G. Hanke, L. Höber and J. Antrekowitsch: Charakterisierung und Aufarbeitungsoptionen für Stäube der Kupfer-Sekundärmetallurgie. Berg und Hüttenmännische Monatshefte, 2020, Heft 10, 587-591
Brandner, U., M. Leuchtenmüller and J. Antrekowitsch: Vorstellung eines am Lehrstuhl für Nichteisenmetallurgie entwickelten thermodynamischen Modells des Wälzprozesses. Berg- und hüttenmännische Monatshefte : BHM. (November 2020)
Auer M. and J. Antrekowtisch: Alternative Lösungen für das Recycling von Stahlwerksstaub am Beispiel 2sDR-Verfahren. Berliner Konferenz: mineralische Nebenprodukte und Abfälle, 2020
Antrekowitsch J., G. Hanke, F. Melcher and H. Flachberger: Das COMET-Projekt COMMBY – Aufbau eines fachübergreifenden Forschungsnetzwerkes zur Nutzung metallhältiger Nebenprodukte. Berg und Hüttenmännische Monatshefte, 2020, Heft 8, 338-345
Antrekowitsch J. and G. Hanke: Characterization and Processing of Residues from Hydrometallurgical Zinc Smelters. Proceedings of Lead&Zinc 2020, 9th International Symposium on Lead and Zinc Processing, 437-445
Antrekowitsch J. and G. Hanke: Evaluation and Certification Strategies for Lead–Zinc-Bearing Residues. Proceedings of Lead&Zinc 2020, 9th International Symposium on Lead and Zinc Processing, 309-318
Antrekowitsch J. and G. Hanke: Potenziale von Nebenprodukten der metallurgischen Industrie als sekundäre Rohstoffquelle. Berg und Hüttenmännische Monatshefte, 2020, Heft 10, 572-577
Schatzmann W. and J. Antrekowitsch: Assessment of by-products – from waste to values. Wastes: Solutions, Treatment and Opportunities, Lissabon, Portugal, 2019
Leuchtenmüller M., J. Antrekowitsch und S. Steinlechner: A Kinetic Study Investigating the CarbothermicRecovery of Chromium from a Stainless-Steel Slag. Metallurgical and Materials Transactions B (2019), pp 1-8
Antrekowitsch J. and S. Steinlechner: Efficient Utilization of Zinc-, Lead- and Copper-Containing By-Products, REWAS TMS 2019, San Antonio, USA, 2019
Steinlechner S. and J. Antrekowitsch: Extraction of Zinc, Silver and Indium via Vaporization from Jarosite Residue, REWAS TMS 2019, San Antonio, USA, 2019
Pichler C., J. Antrekowitsch and K. Pilz: Pyrometallurgical Processing of Desulphurization Slags. Proceeding of Extraction 2018, 127–135
Zschiesche C., M. Ayhan and J. Antrekowitsch: Challenges and Opportunities of a Lead Smelting Process for Complex Feed Mixture. Proceeding of Extraction 2018, 325–338
Antrekowitsch J. and G. Hanke: Steel Mill Dust — Only a Zinc Resource or a Potential Material for Multi Metal Recycling?. Proc. of SIPS 2018, online proceedings
Steinlechner S. und J. Antrekowitsch: Thermodynamic considerations for a pyrometallurgical extraction of indium and silver from a jarosite residue. Journal of Metals (2018)
Steinacker S. R. and J. Antrekowitsch: Aspectos de la formación de polvo volátil en la industria del cobre primario. RevistaMatéria 23, 2, 2018, 1–6
Wegscheider S., J. Antrekowitsch and S. Steinlechner: Recycling of jarosite and electric arc furnace dust in a metal bath process to recover valuable metals. Proc. of SIPS 2017, Vol.7, Sustainable Industrial Processing Summit, Cancun, Mexico, 2018, 103–110
Antrekowitsch J. and G. Hanke: Silver and Gold recovery from dumps out of metallurgical operations. Proceedings of Annual Conference of International Precious Metals Institute (2017), online proceedings
Steinacker S. and J. Antrekowitsch: Hydrometallurgical Treatment of a Copper-Iron-Molybdenum Alloy. World of Metallurgy – Erzmetall (2017), 70, 6, 319–326
Steinacker S. and J. Antrekowitsch: Treatment of Residues from the Copper Industry with an Alternative Approach for Electric Furnace Slag. Berg- und Hüttenmännische Monatshefte (2017), 162, 7, 252–257
Steinacker S. and J. Antrekowitsch: The Role and Influence of Impurities on the Quality of Copper Cathodes. The Publications of the MultiScience – XXXI. microCAD International Multidisciplinary Scientific Conference (2017), Miskolc, Ungarn, 1–8
Steinacker S. and J. Antrekowitsch: Investigation of the Leaching Behavior of a Copper-Iron-Molybdenum Alloy in H2SO4. Proceedings of ALTA 2017 (2017), Perth, Australien, 306–313
Wegscheider S., G. Hanke, S. Steinlechner and J. Antrekowitsch: Process development for a combined treatment of EAFD and jarosite. Proc. of Wastes: Solutions, Treatments and Opportunities (2017), Porto, Portugal, 37–43
Patscheider St., H. Flachberger and J. Antrekowitsch: Orientierende Untersuchungen zum Einsatz von Klassierprozessen in der Nichteisenmetallurgie. BHM Berg- und Hüttenmännische Monatshefte, 8/2017, 345–351
Benigni C., C. Pichler and J. Antrekowitsch: Impurities of secondary zinc oxides as limiting factors for the primary industry. Proc. of COM (2017), Vancouver, Canada
Benigni C., C. Pichler and J. Antrekowitsch: Zinc oxide from steel mill dust – A wide range of opportunities. Proc. of ESTAD (2017), Wien, Österreich
Pichler C., Antrekowitsch J. and Pilz K.: Thermische Behandlung von Entschwefelungsschlacke aus der Eisen- und Stahlindustrie. Mineralische Nebenprodukte und Abfälle (2017), Berlin, Deutschland, 223–237
Pichler C. and J. Antrekowitsch: Pyrolysis Gas as a Renewable Reducing Agent for the Recycling of Zinc- and Lead-Bearing Residues: A Status Report. JOM (2017), doi:10.1007/s11837-017-2341-7
Pichler C., S. Steinlechner and J. Antrekowitsch: Primary Lead Slags – A potential Secondary Resource. World of Metallurgy – Erzmetall, 70/2017, 1, 33–41
Antrekowitsch J.: By-products and their contribution to a sustainable metal production. Proc. of SIPS 2016, Sustainable Industrial Processing, China, 2016
Antrekowitsch J.: Recycling of Poly-Metallic Residues from Metal Industry – Current Status and Future Developments. Proc. Of TMS 2016, 145 Annual Meeting & Exhibition – REWAS, Nashville, USA, 2016
Steinlechner S. and J. Antrekowitsch: Residues from Lead, Zinc and Copper Industry and their Possible Contribution to the Supply of Selected Minor Elements. Proc. of COM 2016 – 55th Conference of Metallurgists hosted by IMPC 2016, Quebec City, Kanada, 1–8
Antrekowitsch J. and S. Steinlechner: IRON AS A LIMITING FACTOR IN THE DIRECT LEACHING OF WAELZ OXIDES, Proc. of COM 2016 – 55th Conference of Metallurgists hosted by IMPC 2016, Quebec City, Kanada, 1–9
Benigni C., C. Pichler and J. Antrekowitsch: Halides – Associated problems during the zinc production process. Proc. of OPMR (2016), Budapest, Ungarn, 149–154
Steinacker S., Antrekowitsch J., Wibner S. and C. Wibner: Copper Recovery from Sulfidic Particles in Electric Furnace Slag. World of Metallurgy – Erzmetall 69 (5/2016), 261–268
Steinacker S., Antrekowitsch J. and H. Schnideritsch: Investigation and Pyrometallurgical Reduction of Copper Compounds from Electric Furnace Slag. Proceedings of Copper 2016, Kobe, Japan
Steinacker S. and J. Antrekowitsch: Aspectos de la Formación de Polvo Volátil en la Industria del Cobre Primario. Libro de Resumenes 16º SAM-CONAMET Congreso Internacional de Metalurgia y Materiales, Córdoba, Argentina
Steinacker S. and J. Antrekowitsch: Treatment of Residues from the Copper Industry Including a New Approach for Electric Furnace Slag. Proceedings of OPMR 2016, Budapest, Hungary
Pichler C., Antrekowitsch J. and Pilz K.: Thermal processing of desulphurization slags. Proc. of 14th International Symposium on the desulphurization of hot metal and steel (2016), Athen, Griechenland, 73–80
Steinacker S. und J. Antrekowitsch: Kinetic Investigation of the Electric Furnace Copper Slag Treatment. Collected Proceedings of the TMS 2016 145th Annual Meeting, Nashville, TN, USA
Steinacker S. und J. Antrekowitsch: Recyclingmethoden für Reststoffe aus der Kupfermetallurgie. Recycling und Reststoffe: Band 9, TK Verlag Karl Thomé-Kozmiensky, S. 497-512, Nietwerder, Deutschland
Leuchtenmueller M., G. Roesler und J. Antrekowitsch: Recovery of Chromium from Stainless Steel Slags. The Publications of the MultiScience – XXX microCAD International Multidisciplinary Scientific Conference, University of Miskolc, Hungery, 2016
Rösler, G., C. Pichler, S. Steinlechner und J. Antrekowitsch: Mini Mill Solutions in the Recycling of Electric Arc Furnace Dust – The 2sDR Process. Proc. of REWAS 2016, Nashville Tennessee, p.43–48
Antrekowitsch J.: Stahlwerksstaubrecycling im 21.Jahrhundert – aktuelle Entwicklungen und zukünftige Herausforderungen. Recycling und Rohstoffe, Karl J. Thomé-Kozmiensky (Hrsg), TK Verlag, 2015, S. 363-370
Antrekowitsch, J. and G. Rösler: Steel mill dust recycling in the 21st century. Proc. of XXIX. microCAD International Multidisciplinary Scientific Conference (2015), Miskolc, Hungary
Antrekowitsch H, S. Luidold, J. Antrekowitsch, S. Pogatscher, S. Steinlechner: Aktuelle Entwicklungstrends und zukünftige Herausforderungen im Bereich der Nichteisenmetallurgie. Berg- und Hüttenmännische Monatshefte: BHM (2015) 1–6
Steinacker S., R. Rumpold und J. Antrekowitsch: Behandlung und Verwertung der Reststoffe aus der Kupfer-Metallurgie. Mineralische Nebenprodukte und Abfälle 2 (2015), TK Verlag, Berlin, Deutschland
Steinacker S., H. Schnideritsch and J. Antrekowitsch: Thermodynamic Aspects of Flue Dust Formation in the Primary Copper Industry. Proc. Of the 54th Annual COM (2015), MetSoc, Toronto, Kanada
Steinacker S. and J. Antrekowitsch: Thermodynamic Considerations for Primary Copper Flue Dust. World of metallurgy – Erzmetall 68 (8/2015), p. 328-335
Pichler C. and J. Antrekowitsch: Recycling of Zinc and Lead Bearing Residues with Pyrolysis Gas. JOM (2015) Vol. 67 (9), 2038-2046
Pichler C. und J. Antrekowitsch: Strategies for the treatment of metallurgical recycling slags. Proc. of Wastes: Solutions, Treatments and Opportunities (2015), Viana do Castelo, Portugal, 221-227
Pichler C. and J. Antrekowitsch: Sustainable ways to recycle metallurgical residues in the 21st century. Proc. of Lead&Zinc (2015), Düsseldorf, Deutschland, 65-74
Antrekowitsch J, Rösler G, Steinacker S. State of the Art in Steel Mill Dust Recycling. Chemie-Ingenieur-Technik. 2015 ;87 (11):1498-1503
Rösler G, Antrekowitsch J. Product upgrade of Waelz oxide using an altenative method. 2015. Proceedings of MultiScience – XXIX. microCAD, Miskolc, Ungarn
Rösler G, Pichler C, Wegscheider S, Antrekowitsch J. Sustainable Recovery of Heavy Metals from Metallurgical Dust – the 2sDR process. in Proceedings PbZn 2015: Volume 2. GDMB. 2015. S. 877-886, Düsseldorf, Deutschland
Antrekowitsch J. und S. Steinlechner: The current status of mini mill solutions for the recycling of steel mill dusts. Proc. Of SIPS2015 – Sustainable Industrial Processing Summit and Exhibition, Antalya, Turkey (2015)
Osthof H., S. Steinlechner und J. Antrekowitsch: Alternative Models for the Calculation of CAPEX and OPEX for a Hydrometallurgical Plant. Proc. Of the 8th Southern African Base Metals Conference, Livingstone, Zambia (2015)
Steinlechner S. und J. Antrekowitsch: POTENTIAL OF INDUSTRIAL WASTES RECYCLING FROM LEAD, ZINC OR COPPER INDUSTRY TO CONTRIBUTE TO THE SUPPLY OF MINOR METALS. Proc. Of SIPS2015 – Sustainable Industrial Processing Summit and Exhibition, Antalya, Turkey (2015)
Steinlechner S. und J. Antrekowitsch: Potential of lead, zinc and copper containing residues to contribute to the supply of minor metals. Proc. of Wastes: Solutions, Treatments and Opportunities (2015), Viana do Castelo, Portugal, 341-357
Steinlechner S. und J. Antrekowitsch: Recycling potential of precious metals from zinc, lead and copper containing residues. Proc. of EMC (2015), Düsseldorf, Deutschland
Steinlechner S. und J. Antrekowitsch: Potential of a Hydrometallurgical Recycling Process for Catalysts to Cover the Demand for Critical Metals, Like PGMs and Cerium. JOM 67 (2015), No.2, 406–411
Wegscheider S., S. Steinlechner, C. Pichler, G. Rösler und J. Antrekowitsch: The 2sDR process – Innovative treatment of Electric Arc Furnace Dust. Proc. of Wastes: Solutions, Treatments and Opportunities (2015), Viana do Castelo, Portugal, 355–360
Steinacker S., R. Rumpold und J. Antrekowitsch: Recycling of Residues from the Copper Industry. Proc. of EMC 1 (2015), Düsseldorf, Deutschland, 119–132
Pichler C., A. Unger und J. Antrekowitsch: Rückgewinnung von Wertmetallen aus Stahlwerksstäuben durch ein reduzierendes Metallbad. Aschen-Schlacken-Stäube. Berlin, Deutschland, 23.–24. September 2013, 587–598
Unger A., S. Steinlechner und J. Antrekowitsch: Upgrade of WOX with high energy solar radiation. Proc. MultiScience. XXVIII microCAD International Multidisciplinary Scientific Conference, Miskolc, Ungarn, 2014
Pichler C. und J. Antrekowitsch: Alternative Verfahren zur Aufarbeitung von Stäuben aus der Stahlindustrie. Mineralische Nebenprodukte und Abfälle, Berlin, Deutschland, 30.06-01.07 2014, 399-409
Steinlechner S. und J. Antrekowitsch: Behavior of Halogen Compounds in Secondary Zinc Oxide during Thermal Treatment. World of Metallurgy, Erzmetall 67 (2014), No. 4, 213-219
Antrekowitsch J., S. Steinlechner, A. Unger, G. Rösler, C. Pichler und R. Rumpold: Zinc and Residue Recycling. Handbook of Recycling, State-of-the-art for practitioners, Analysts, and Scientists, Seite 113 – 124
Antrekowitsch J., S. Steinlechner, A. Unger, G. Rösler, C. Pichler und R. Rumpold: Optimization and Biomass Utillization in Heavy Metal Recycling. BHM (2014) Vol. 159 (1), p. 23-29
Rumpold R. und J. Antrekowitsch: Strategies to recover the valuable metal fraction from flue dust of the secondary copper production. Proc. of Shechtman International Symposium 2014, Cancun, Mexico, 2014
Rösler G., C. Pichler und J. Antrekowitsch: Recycling of metallurgical wastes by a sustainable ironbath process. Sustainable industrial processung summit/Shechman International Symposium. (2014), S. 181–192
Rösler G., C. Pichler und J. Antrekowitsch: Recycling of metallurgical wastes by a sustainable ironbath process with special focus on the carburization step. Proceedings of MultiScience – XXVIII microCAD International Multidisciplinary Scientific Conference. (2014)
Rösler G., C. Pichler, J. Antrekowitsch und S. Steinlechner: “2sDR”: Process Development of a Sustainable Way to Recycle Steel Mill Dusts in the 21st Century. JOM 66 (2014) 9, S. 1721–1729
Unger A., S. Steinlechner und J. Antrekowitsch: A sustainable recycling process for simultaneous recovery of Zn, Pb and Ag from a dumped slag. Proceedings of Shechtman International Symposium Vol. 3. (2014), S. 179–190
Unger A., S. Steinlechner und J. Antrekowitsch: Simultaneous recovery of valuables from a dumped slag. Proceedings of the 46th International October Conference on Mining and Metallurgy. (2014), S. 52–56
Antrekowitsch J. und G. Rösler: Metallurgie mit nachwachsenden Rohstoffen. Recycling und Rohstoffe, Band 6, 2013, S.405-415
Agirre Arisketa I., T. Griessacher, G. Rösler und J. Antrekowitsch: Production of charcoal as an alternative reducing agent from agricultural residues using a semi-continuous semi-pilot scale pyrolysis screw reactor. Fuel Processung Technology 106 (2013), 114-121
Pichler C., G. Schneeberger und J. Antrekowitsch: Utilization of Residues from the Iron and Steel Industry with main Focus on Filter Dusts. Proc. of XXVII. microCad International Scientific Conference (2013), Miskolc
Schneeberger G. und J. Antrekowitsch: Investigations in the Behaviour of Quasi-Ternary Slag System during Recycling of Residues from Steel Industry. Proc. of XXVII. microCad International Scientific Conference (2013), Miskolc
Pichler C., G. Schneeberger und J. Antrekowitsch: Treatment and Application of slags from Recycling Process of Metal Industry Residues. Proc. of EMC 3 (2013), Weimar, Deutschland, 1203-1206
Unger A. und J. Antrekowitsch: Reforming of a Zinc Containing Gas Mixture with Steam for the Generation of ZnO and H2. Proc. of EMC 2 (2013), Weimar, Deutschland, 587-593
Pichler C. und J. Antrekowitsch: INNOVATIVE RECYCLINGSLAG-TREATMENT. WASTES, 11.-13. September, Braga, Portugal, 2013
Rösler G. und J. Antrekowitsch: Sustainable Carbonization of Iron Bath by Utilization of Renewable Bio-Char. Proc. of EMC 1 (2013), Weimar, Deutschland, 409-414
Rumpold R. und J. Antrekowitsch: Removal of Halogens in Heavy Metal containing Flue Dust from the Secondary Copper Production. Proc. of EMC 3 (2013), Weimar, Deutschland, 933-938
Unger A., S. Steinlechner und J. Antrekowitsch: Zinc oxide quality upgrade by a clinkering process obtained from recycling of secondary resources. Recycling of Non-Ferrous metals, Krakau, Polen, 2013
Rösler G. und J. Antrekowitsch: Special designed charcoal for an environmental friendly heavy metal recycling. Proc. of the Annual World Conference of Carbon (2013), Rio de Janeiro, Brasilien
Pichler C., A. Unger und J. Antrekowitsch: Rückgewinnung von Wertmetallen aus Stahlwerksstäuben durch ein reduzierendes Metallbad. Aschen-Schlacken-Stäube, 23.-24. September, Berlin, Deutschland, 2013, 587-598
Unger A., S. Steinlechner und J. Antrekowitsch: Recovery of valuable metals like Zn, Pb and Ag from a hazardous residue generated in the pyrometallurgical lead-, zinc- production. WASTES, 11.-13. September, Braga, Portugal, 2013
Griessacher T. und J. Antrekowitsch: Grüne Kohle. Recycling Magazin, Ausgabe 20, (2013), 28-31
Antrekowitsch J.: Recovery of Zinc and Iron from Steel Mill Dusts by the use of a TBRC. A possible Mini-mill Solution?. Proc of REWAS, San Antonio 2013
Antrekowitsch J.: The Potential of Lead Recycling from Steel Mill Residues. Proc. of 3rd Secondary Lead Conference, Singapur 2013
Steinlechner S. und J. Antrekowitsch: PGM recycling from catalysts in a closed hydrometallurgical loop with an optional cerium recovery. REWAS TMS 2013, San Antonio, USA, 2013
Pichler C. und J. Antrekowitsch: SLAGS FROM METAL RECYCLING PROCESSES AS INNOVATIVE SECONDARY RESOURCE. Proc. Of 9th Global Slag (2013), Dubai, Vereinigte Arabische Emirate, 56-62
Tzouganatos N., T. Matter, C. Wieckert, J. Antrekowitsch, M. Gamroth und A. Steinfeld: Thermal Recycling of Waelz Oxide Using Concentrated Solar Energy. JOM, Vol. 65, No. 12, 2013, 1733-1743
Rumpold R. und J. Antrekowitsch: Zinc in the copper secondary production and potential recycling technologies. Proc. of Copper 2013, Santiago, Chile, S. 265 – 280
Griessacher T., J. Antrekowitsch und S. Steinlechner: Charcoal from agricultural residues as alternative reducing agent in metal recycling. Biomass and Bioenergy 39 (2012), 139 – 146
Schneeberger G., J. Antrekowitsch und C. Pichler: Development of a New Recycling Process for High Zinc Containing Steel Mill Dusts including a Detailed Characterization of an Electric Arc Furnace Dust. BHM, 157. Jg. (2012), Heft 1, 1 – 6
Steinlechner S., J. Antrekowitsch und G. Schneeberger: Influence of temperature and treatment time on the halide removal yield during clinkering. Proc. of XXVI. microCad International Scientific Conference (2012), Miskolc, Ungarn
Griessacher T. und J. Antrekowitsch: Utilization of Biomass at the Recycling of Heavy Metal Containing Wastes. Waste and Biomass Valorization, 2012, Volume 3, Number 3, 369 – 374
Rösler G., T. Griessacher, I. Agirre Arisketa und J. Antrekowitsch: Charcoal production for metallurgical processes with special focus on structural properties. Proc. of 4th International Conference on Engineering for Waste and Biomass Valorisation (2012), Porto, Portugal
Schneeberger G. und J. Antrekowitsch: Implementation of a previous purification step in course of the recycling of filter dusts from the iron and steel industry. Proc. of XXVI. microCad International Scientific Conference (2012), Miskolc
Schneeberger G., J. Antrekowitsch und C. Pichler: Die Verwertung von Hüttenreststoffen aus der Eisen- und Stahlindustrie mit Schwerpunkt Filterstäube. Das XII. Internationale Symposium Entschwefelung von Roheisen und Stahl, Almamet GmbH, 19.-22. September, Wien, Österreich, 2012, 13 – 24
Rösler G., T. Griessacher und J. Antrekowitsch: The influence of charcoal properties on its applicability in metallurgical operations. Proc. of the 4th International Symposium on Energy from Biomass and Waste (2012), Venedig, Italien
Antrekowitsch J.: Process Development in the Recycling of metal containing industrial Wastes. Proc. of PSU-IC 2012, 10th International Conference on Mining, Materials and Petroleum Engineering / 6th International Conference on Earth Resources Technology (2012), Songkhla, Thailand
Agirre Arisketa I., T. Griessacher, A. Adrados, J. Requies, J. Cambra und J. Antrekowitsch: Catalytic upgrading of biomass pyrolysis vapors to bio-syngas, a possible reducing agent for metallurgical processes. Proc. of 4th International Conference on Engineering for Waste and Biomass Valorisation (2012), Porto, Portugal
Rumpold R. und J. Antrekowitsch: Recycling of platinum group metals from automotive catalysts by an acidic leaching process. Platinum Conference “A Catalyst for Change” (2012), Sun City, South Africa, 695 – 713
Rumpold R. und J. Antrekowitsch: Simultaneous Recovery Of Valuable Metals From Automotive Catalysts Through Hydrometallurgical Processing. Proc. of 51th Annual Conference of Metallurgists (2012), Niagara Falls, Canada, 197 – 210
Rumpold R. und J. Antrekowitsch: Recycling of PGMs from spent automotive-catalysts: State of the Art and future perspectives. Proc. of XXVI. microCad International Scientific Conference (2012), Miskolc, Hungary
Griessacher T. und J. Antrekowitsch: Biomasse – Ein Ausweg aus der CO2-Problematik im Metallrecycling!?. BHM, 156. Jg. (2011), Heft 1, 14 – 21
Griessacher T. und J. Antrekowitsch: Hydrogen rich and carbon neutral gas as reducing agent for heavy metal containing residues. Proc. Energy Technology TMS (2011), San Diego, USA, 197 – 208
Schneeberger G. und J. Antrekowitsch: Characterization of Dusts from BOF-Steelmaking and Foundry Industry. Proc. of XXV. microCad International Scientific Conference (2011), Miskolc, 47 – 54
Steinlechner S. und J. Antrekowitsch: Investigations in Clinkering for the Removal of Halogens from Secondary Zinc Oxides. Proc. of XXV. microCad International Scientific Conference (2011), Miskolc, 55 – 62
Steinlechner S. und J. Antrekowitsch: Options for Halogen Removal from Secondary Zinc Oxides. Proc. of 3rd Seminar on Networking between Zinc and Steel (2011), Leoben, Österreich, 47 – 56
Schneeberger G. und J. Antrekowitsch: Characterization of Typical Dusts from Steel and Foundry Industry. Proc. of 3rd Seminar on Networking between Zinc and Steel (2011), Leoben, Österreich, 21 – 29
Griessacher T. und J. Antrekowitsch: Alternative Reducing Agents in the Recycling of Heavy Metal-Containing Residues. Proc. of EMC 4 (2011), Düsseldorf, Deutschland, 1349 – 1361
Steinlechner S. und J. Antrekowitsch: Hydro- and Pyrometallurgical Options for the Upgrading of Low Grade Secondary Zinc Oxides. Proc. of EMC 2 (2011), Düsseldorf, Deutschland, 533 – 546
Steinlechner S., G. Schneeberger und J. Antrekowitsch: Possibilities for the Improvement of Secondary Zinc Oxide Quality. Proc. of 50th Annual Conference of Metallurgists (COM 2011), Montreal, Kanada, 247 – 257
Antrekowitsch J. und S. Steinlechner: The Recycling of Heavy-metal Containing Wastes: Mass Balances and Economical Estimations. JOM 63 (2011) 1, 68 – 72
Schneeberger G. und J. Antrekowitsch: New developments in the recycling of zinc containing dusts from steel and foundry industry. Proc. of EMC 4 (2011), Düsseldorf, Deutschland, 1493 – 1506
Antrekowitsch J., T. Griessacher und S. Steinlechner: Optimization in Recycling of Zinc Containing Residues. Proc. of 1st International Conference on WASTES: Solutions, Treatments and Opportunities (2011), Guimaraes, Portugal, 258 – 263
Griessacher T. und J. Antrekowitsch: Utilization of Biomass at the Recycling of Heavy Metal Containing Wastes. Proc. of 1st International Conference on WASTES: Solutions, Treatments and Opportunities (2011), Guimaraes, Portugal, 105 – 110
Schneeberger G., S. Steinlechner und J. Antrekowitsch: Characterization and Reduction of Filter Dusts in the Liquid Phase. Proc. of 50th Annual Conference of Metallurgists (COM 2011), Montreal, Kanada, 387 – 397
Antrekowitsch J. und S. Steinlechner: Optimization in the Recycling of Zinc Containing Industrial Residues. Proc. of Earth2011 – The 11th International Symposium on East Asia Resource Recycling Technology (2011), Kaohsiung, Taiwan, 608 – 611
Steinlechner S. und J. Antrekowitsch: Concepts for the SImultanous Recovery of Valuable Metals from Zinc Bearing Residues. Proc. of Earth2011 – The 11th International Symposium on East Asia Resource Recycling Technology (2011), Kaohsiung, Taiwan, 733 – 736
Antrekowitsch J. und S. Steinlechner: Melting Behavior Of Complex Zinc Containing Residues. Proc. of International Symposium on Metals and Materials Processing in a Clean Environment (Fray Symposium) (2011), Cancun, Mexiko
Steinlechner S. und J. Antrekowitsch: Investigations In The Improvement Of Recycling Of Electric Arc Furnace Dusts. Proc. of International Symposium on Metals and Materials Processing in a Clean Environment (Fray Symposium) (2011), Cancun, Mexiko
Antrekowitsch J.: New Perspectives in the Recycling of Dusts from Integrated Steel Mills. Proc. of EMC 4 (2011), Düsseldorf, Deutschland, 1305 – 1314
Antrekowitsch J. und D. Offenthaler: Die Halogenproblematik in der Aufarbeitung zinkhältiger Reststoffe. BHM, 155. Jg. (2010), Heft 1, 31 – 39
Griessacher T. und J. Antrekowitsch: Charcoal from Biomass – A Sustainable Reductant. Proc. of 3rd International Conference on Engineering for Waste and Biomass Valorisation (2010), Peking, China
Griessacher T., J. Antrekowitsch und D. Offenthaler: Bio-char respectively Bio-coke from Agricultural Wastes for Metallurgical Uses. Proc. of 18th European Biomass Conference and Exhibition From Research to Industry and Markets (2010), Lyon, Frankreich, 1475 – 1480
Antrekowitsch J. und S. Steinlechner: Characterization of Zinc Containing Residues from Copper and Zinc Industry. Proc. of XXIV. microCad International Scientific Conference (2010), Miskolc, S. 1 – 10
Steinlechner S. und J. Antrekowitsch: Economical potential of the use of biomass in metallurgical recycling processes. Proc. of 3rd International Conference on Engineering for Waste and Biomass Valorisation (2010), Peking, China
Steinlechner S. und J. Antrekowitsch: Investigation in Simultaneous Recovery of Valuable Metals from Heavy-Metal Containing Residues. Proc. of XXIV. microCad International Scientific Conference (2010), Miskolc, S. 59 – 69
Antrekowitsch J. und S. Steinlechner: Potential of hydrogen as alternative reducing agent in metallurgical processes. Proc. of 3rd International Conference on Engineering for Waste and Biomass Valorisation (2010), Peking, China
Antrekowitsch J. und S. Steinlechner: Bis zum letzten Rest – NE-Metalle Wissenschaftler der Montanuniversität Leoben forschen an einem effizienten Recycling von Reststoffen aus der Metallurgie – dem “Zero-Waste-Verfahren”. Recycling Magazine, Ausgabe 09/10 (2010), 26 – 29
Antrekowitsch J. und S. Steinlechner: Characterization of Zinc Containing Residues from Nonferrous Industry. Proc. of 49th Annual Conference of Metallurgists (COM 2010), Vancouver, Kanada, 153 – 163
Antrekowitsch J. und S. Steinlechner: Evaluation and Recycling Potential of Different Zinc Containing Residues from Metallurgical Industry. Proc. of 49th Annual Conference of Metallurgists (COM 2010), Vancouver, Kanada, 851 – 859
Steinlechner S. und J. Antrekowitsch: Simultaneous Recovery of Various Metals from Zinc Containing Residues on a Reducing Metal Bath. Proc. of 49th Annual Conference of Metallurgists (COM 2010), Vancouver, Kanada, 889 – 897
Antrekowitsch J.: Complex Heavy Metal Containing Wastes: Between Landfilling and Recycling. Proc. of EMC 1 (2009), Innsbruck, Österreich, 3 – 13
Griessacher T. und J. Antrekowitsch: Biomass as Reducing Agent in the Metallurgy. Proc. of EMC 3 (2009), Innsbruck, Österreich, 1019 – 1029
Offenthaler D., J. Antrekowitsch und F. Ludewig: Options to Avoid the hot acid Leaching Process in Zinc Hydrometallurgy. Proc. of EMC 3 (2009), Innsbruck, Österreich, 1111 – 1125
Schnideritsch H., J. Antrekowitsch, H. Antrekowitsch und C. Wagner: Characterisation, Melting and Reduction Behaviour of Heavy Metal Containing Residues. Proc. of EMC 3 (2009), Innsbruck, Österreich, 1155 – 1167
Antrekowitsch J., T. Griessacher und D. Offenthaler: Forschung im Bereich der Vernetzung von Zink und Stahl an der NE-Metallurgie der Montanuniversität Leoben. Proc. von 2. Seminar – Vernetzung von Zink und Stahl (2009), Leoben, Österreich, 9 – 19
Schnideritsch H. und J. Antrekowitsch: Schmelz- und rasterelektronenmikroskopische Untersuchungen an Stäuben aus der Stahlindustrie. Proc. von 2. Seminar – Vernetzung von Zink und Stahl (2009), Leoben, Österreich, 43 – 53
Antrekowitsch J. und T. Griessacher: The current status of recycling of electric arc furnace dusts and perspectives for the future. Proc. of XXIII. microCAD (2009), Miskolc, Ungarn, 33 – 43
Antrekowitsch J., S. Steinlechner und H. Schnideritsch: Charakterisierung von komplexen Reststoffen der Kupfer- und Zinkmetallurgie. BHM, 154. Jg. (2009), Heft 7, 320 – 327
Antrekowitsch H., S. Luidold und J. Antrekowitsch: Experimental Investigations on V-containing Steelwork Slags with a low V2O5 content. BHM, 154. Jg. (2009), Heft 7, 328 – 333
Offenthaler D., F. Ludewig und J. Antrekowitsch: Avoiding the Hot Acid Leaching Process in Zinc Hydrometallurgy by Reduction of Calcine. World of Metallurgy – Erzmetall 62 (2009), No. 6, 376 – 384
Schnideritsch H., J. Antrekowitsch und C. Wagner: Charakterisierung von schwermetallhaltigen Reststoffen. Proc. of Depotech (2008), Leoben, Österreich, 649 – 652
Antrekowitsch J., T. Griessacher und D. Offenthaler: Characterization of Zinc Containing Residues from Metallurgical Processes. Proc. of REWAS (2008) Cancun, Mexico, 775 – 783
Antrekowitsch J.: Zinc Oxide from Recycling Processes as a Source for Electrolytic Galvanising. Proc. of REWAS (2008) Cancun, Mexico, 597 – 603
Antrekowitsch J.: Behaviour of complex Residues from Steel Industry during Smelting and Reduction. Proc. of microCAD International Scientific Conference (2008), Miskolc, 1 – 8
Antrekowitsch J., T. Griessacher, D. Offenthaler und H. Schnideritsch: Charakterisierung und Verhalten von Zink-, Blei- und Halogenverbindungen beim Recycling von Elektrolichtbogenofenstäuben. BHM, 153. Jg. (2008), Heft 3, 182 – 188
Antrekowitsch J.: The behavior of iron and zinc containing slags on an inductively heated coke bed. Proc. of EMC 2 (2007), Düsseldorf, Deutschland, 823 – 830
Konetschnik S., J. Antrekowitsch, D. Offenthaler und H. Antrekowitsch: Thermische Vorbehandlung PGM-haltiger Katalysatoren für die hydrometallurgische Aufarbeitung. BHM 152 (2007) 3, 68 – 75
Konetschnik S., D. Offenthaler, J. Antrekowitsch und J. Sitter: Recovery of PGMs from spent catalyst material with a new HCl – H2SO4 leaching process. Proc. of EMC 2 (2007), Düsseldorf, Deutschland, 679 – 690
Wenzl C., H. Antrekowitsch, J. Antrekowitsch und D. Offenthaler: Aufarbeitung von verunreinigten Sn-Schrotten und Sn-hältigen Reststoffen. Proc. of Depotech (2006), Leoben, Austria, 391 – 398
Offenthaler D. und J. Antrekowitsch: Fluor- und Chlor-Problematik beim Recycling zinkhältiger Stahlwerksstäube. Proc.of Vernetzung von Zink und Stahl – 42.Metallurgisches Seminar der GDMB (2006), Leoben, Österreich, 27 – 40
Offenthaler D., J. Antrekowitsch und S. Konetschnik: Recycling of Platinum from spent Catalysts. Proc.of Sohn International Symposium 5 (2006), San Diego, Californien, USA, 451 – 458
Antrekowitsch J. und D. Offenthaler: Problemstellungen und Lösungsansätze in der Aufarbeitung zinkhältiger Stahlwerksstäube. Proc.of Vernetzung von Zink und Stahl – 42.Metallurgisches Seminar der GDMB (2006), Leoben, Österreich, 17 – 24
Antrekowitsch J., D. Offenthaler und A. Edlinger: Inducarb – A new reducing Facility for various Oxidic. Proc.of Sohn International Symposium 5 (2006), 163 – 170
Antrekowitsch J., G. Graller-Kettler, B. Matl und A. Pestalozzi: Use of the Flash Reactor Principle to Recover Zinc from Steel-Mill Dusts. Journal of Metals (2005), 43 – 46
Antrekowitsch J., M. Hochenhofer und D. Offenthaler: A Thermochemical Study of Different Options for Halogen Removal from Nonferrous Metal-Containing Wastes. Proc. of 134th TMS Annual Meeting & Exhibition (2005), San Francisco, USA, 1011 – 1019
Antrekowitsch J. und A. Sprung: Reduction of Melted Steel Mill Dust in an Iron Bath – a “Zero Waste” Solution. Proc.of International Symposium on Lead & Zinc Processing 1 (2005), Kyoto, Japan, 779 – 789
Matl B., J. Antrekowitsch und D. Offenthaler: Processing of residues by a new developed Flash-Reactor. Proc. of microCAD 2005 (2005), Miskolc, Ungarn, 19 – 24
Antrekowitsch H., J. Antrekowitsch und R. Hepberger: Pyrometallurgische Aufarbeitung von Reststoffen in einem Flash-Reaktor. Proc. of Depotech (2004), Leoben, Österreich, 197 – 204
Antrekowitsch J. und H. Antrekowitsch: Dezincing of steel scrap. A solution for the zinc-iron problem in steel industry?. BHM 149 (2004) 1, 28 – 34
Antrekowitsch J., D. Offenthaler und A. Edlinger: Zinc Containing Steel Mill Dusts – Between Recycling And Landfilling. Proc. of Global Symposium on Recycling, Waste Treatment and Clean Technology III (2004), Madrid, Spanien, 2133 – 2141
Thuy M., J. Antrekowitsch, H. Antrekowitsch und J. Pesl: Recovery of Valuable Metals from Sludges and Residues of the Secondary Copper Industry by atmospheric Leaching. BHM 149 (2004) 1, 9 – 15
Antrekowitsch J. und H. Antrekowitsch: Investigations in different reducing agents for the pyrometallurgical treatment of steel mill dusts. Proc. of 132th TMS Annual Meeting & Exhibition (2003), San Diego, USA, 539 – 549
Antrekowitsch J. und H. Antrekowitsch: Dezincing of steel scrap. A solution for the zinc-iron problem in steel industry?. Proc. of EMC (2003), Hannover, Deutschland, 449 – 463
Antrekowitsch J. und H. Antrekowitsch: Einfluss unterschiedlicher Reduktionsmittel bei der pyrometallurgischen Aufarbeitung von Elektrolichtbogenofenstäuben. Stahl und Eisen 123 (2003) 5, 61 – 67
Antrekowitsch J. und H. Antrekowitsch: Recovery of Zinc and Iron from EAF Steel Mill Dusts with Special Focus on Halogen and Residues. BHM 148 (2003) 1, 15 – 20
Thuy M., J. Antrekowitsch, H. Antrekowitsch und J. Pesl: Recovery of Valuable Metals from Sludges and Residues of the Secondary Copper Industry by atmospheric Leaching. Proc. of EMC (2003), Hannover, Deutschland, 221 – 240
Antrekowitsch J., H. Antrekowitsch und H. Seebacher: Aufarbeitung von Stahlwerksstäuben. Erzmetall 55 (2002) 5, 49 – 56
Antrekowitsch H., P. Paschen und J. Antrekowitsch: Mengen- und Energiebilanz bei der Herstellung von Zink. Erzmetall 54 (2001) 6, 301 – 311
Antrekowitsch J.: Hydrometallurgische Aufarbeitung von zinkhältigen Stahlwerksflugstäuben aus dem Konverterbereich. BHM 146 (2001) 5, 210 – 215
Antrekowitsch J. und H. Antrekowitsch: Hydrometallurgically Recovering Zinc from Electric Arc Furnace Dusts. Journal of Metals 53 (2001) 12, 26 – 28
Presentations
Antrekowitsch J.: ZERO WASTE PROCESSING OF ZINC CONTAINING SLAGS FROM LEAD INDUSTRY, Plenary Speaker, 9th Intl. Symp. on Sustainable Materials Recycling Processes & Products, Panama City, 2023
Antrekowitsch J.: ZERO WASTE PROCESSING OF ZINC CONTAINING SLAGS FROM LEAD INDUSTRY, Plenary Speaker, 9th Intl. Symp. on Sustainable Materials Recycling Processes & Products, Panama City, 2023
Antrekowitsch J: Recycling of Nonferrous Metals, an important contribution to the raw materials supply chain. International Technical Meeting, Böhler, May 2023, Leoben
Antrekowitsch J: Future processing of by-products from mining and metallurgy considering zero waste and zero CO2 strategies. Invited Speaker, SynerGEM Seminar Series, USGS, Washington 2023
Antrekowitsch J: Zinc Recycling Research. Zinc Experts Meeting, GDMB, Plovdiv, 2023
Hydrogen, a Promising Carbon Substitute in Metallurgy? Keynote Speaker, Advances in Pyrometallurgy – Developing Low Carbon Pathways, TMS Annual Meeting, San Diego 2023
Antrekowitsch J.: Optimierung und Verwertung von Schlacken aus dem Recycling metallurgischer Nebenprodukte. Mineralische Nebenprodukte und Abfälle, Berlin, Deutschland, 2022
Antrekowitsch J.: Efficient steel mill dust recycling – Aiming for a zero waste solution. Rewas 2022 – Developing tomorrow‘s technical cycles, San Diego, USA, 2022
Antrekowitsch J.: Activities of the research group „Industrial by-product recycling“ in zinc metallurgy. International Zinc Experts Meeting, Linz, Austria, 2022
Antrekowitsch J.: Reducing agents from biomass – an environmentally friendly solution for metallurgical processes, SIPS, Phuket, Thailand, 2022
Antrekowitsch J.: Future potentials of the waelz technology as best available technology. 1st International zinc recycling conference, Nashville, USA, 2022
Antrekowitsch J.: Application of special designed biochar in metallurgical processes. Seminar biochar for industry, online, 2022
Antrekowitsch J.: Das COMET-Projekt COMMBY – Aufbau eines fachübergreifenden Forschungsnetzwerkes zur Nutzung metallhältiger Nebenprodukte. Aufbereitungstechnisches Seminar, Leoben, Austria, 2020
Antrekowitsch J.: Characterization and Processing of Residues from Hydrometallurgical Zinc Smelters. Lead&Zinc 2020, 9th International Symposium on Lead and Zinc Processing, San Diego, USA, 2020
Antrekowitsch J.: Evaluation and Certification Strategies for Lead–Zinc-Bearing Residues. Lead&Zinc 2020, 9th International Symposium on Lead and Zinc Processing, San Diego, USA, 2020
Schatzmann W. and J. Antrekowitsch: Assessment of by-products – from waste to values. WASTES Conference 2019, Lissabon, Portugal, 2019
Antrekowitsch J.: Recycling PGMs from Spent Catalysts. Recycling Metals from Industrial Wastes, Colorado School of Mines, Golden, 26th-28th of July, 2018
Antrekowitsch J.: Metal bearing by-products from metallurgical industry – An important resource for the future. MicroCAD-MultiScience, Miskolc, of September, 2018
Antrekowitsch J.: Die Erneuerbarkeit von Metallressourcen – Chancen und Limits für das Recycling. EUMICON, Vienna, 27th of September, 2018
Antrekowitsch J.: 2sDR – 2-step Dust Recycling – a mini mill solution for future steel mill dust recycling. Zinc Experts Meeting, Nordenham, 14th-16th of November, 2018
Antrekowitsch J.: By-products from metallurgical industry – an important resource for Europe’s raw materials strategy. Waste V4 Conference, Miskolc, 22nd-23rd of November, 2018
Antrekowitsch J: Christian Doppler Labor für Optimierung und Biomasseeinsatz beim Recycling von Schwermetallen. Tag der Nichteisenmetallurgie, 29th of November, 2018
Antrekowitsch J.: Steel Mill Dust, a Possible Source for Lead Recycling? – Potential and Recent Developments. Lead Experts Meeting der GDMB, Hamburg, Deutschland, 2017
Antrekowitsch J.: By-products and their contribution to a sustainable metal production. SIPS – Sustainable Industrial Processing, Cancún, Mexiko, 2017
Antrekowitsch J.: By-products from metallurgical operations – An important secondary metal resource for Europe. Wastes: Solutions, Treatments and Opportunities, Porto, Portugal, 2017
Antrekowitsch J.: Rohstoffe und Klimaschutz – Eine kritische Betrachtung aus Sicht der Metallgewinnung. 5. steirisches Klimaforum, Leoben, Österreich, 2017
Antrekowitsch J.: Silver and Gold recovery from dumps out of metallurgical operations. Annual Conference of International Precious Metals Institute, Orlando, USA, 2017
Antrekowitsch J.: Recycling of by-products for a sustainable metal production. OPMR 2016, Budapest, Hungary, 2016
Antrekowitsch J.: By-products and their contribution to a sustainable metal production. SIPS 2016, Sustainable Industrial Processing, Hainan, China, 2016
Antrekowitsch J.: Opportunities for the utilization of zinc oxides from by-products. Zinc experts meeting, GDMB, Odda, Norway, 2016
Antrekowitsch J.: Iron as a Limiting Factor in the Direct Leaching of Waelz Oxides. IMPC/COM 2016, Quebec, Canada, 2016
Antrekowitsch J.: Zinc Recycling Out of Industrial Residues. Recycing Metals from Industrial Waste, Colorado School of Mines, Golden, USA, 2016
Antrekowitsch J.: Opportunities for the utilization of zinc oxides from secondary sources. 8th International Zinc Conference, Dubai, UAE, 2016
Antrekowitsch J.: Recycling of Poly-Metallic Residues from Metal Industry – Current Status and Future Developments. TMS 2016, 145 Annual Meeting & Exhibition – REWAS, Nashville, USA, 2016
Antrekowitsch J.: Current status and recent development in steel mill dust recycling. Recycling of Non-Ferrous Metals, Krakow, Poland, 2016
Antrekowitsch J.: The current status of mini mill solutions for the recycling of steel mill dusts. SIPS2015 – Sustainable Industrial Processing Summit and Exhibition, Antalya, Turkey (2015)
Antrekowitsch J.: Steel Mill Dust Recycling in the 21st Century, XXIX. microCAD International Multidisciplinary Scientific Conference, Miskolc, Ungarn (2015)
Antrekowitsch J.: Recycling of Complex Materials with Focus on Zinc-, Lead- Containing Residues, Colloquium on Secondary Resources, Amirkabir University, Teheran, Iran (2015)
Antrekowitsch J.: Recycling of Zinc, Short Course ate EMC 2015, Düsseldorf, Deutschland (2015)
Antrekowitsch J.: Steel Mill Dust Recycling in the 21st Century – New Developments, Internationa Zinc and Zinc Oxide Conference, IZA, Orlando, USA (2015)
Antrekowitsch J.: Stahlwerksstaubrecycling im 21. Jahrhundert, aktuelle Entwicklungen und zukünftige Herausforderungen, Berliner Recycling- und Rohstoffkonferenz, Berlin, Deutschland (2015)
Antrekowitsch J.: Copper Networkingin South East Europe – Potentials and Challenges, 3rd ESEE-Conference, Leoben, Austria (2015)
Antrekowitsch J.: Knowledge Innovation Community – Lead-Zinc-Recycling from dust and slags, Zinc experts meeting, GDMB, Krakau, Polen (2015)
Antrekowitsch J.: Recovery of Lead in Residues from Hydrometallurgical Zinc Winning, 4th Secondary Lead Conference, Bangkok, Thailand, (2015)
Unger A., S. Steinlechner und J. Antrekowitsch: Upgrade of WOX with high energy solar radiation. XXVIII microCAD International Multidisciplinary Scientific Conference, Miskolc, Ungarn, 2014
Antrekowitsch J.: Rückgewinnung von Zink, Indium und Gallium aus Zink-Tailings mittels bakterieller Laugung. Produktion der Zukunft – kritische Rohstoffe, Linz, 2014
Antrekowitsch J.: Residues from Zinc-, Lead- and Copper production – hidden ressources for Silver and Gold. IPMI, 28th annual conference, Orlando, 2014
Antrekowitsch J.: Heavy Metal Recycling from Complex Wastes. Seminar Nonferrous Metallurgy MUL-Colorado School of Mines. Golden, USA, 2014
Antrekowitsch J.: Primary Metallurgy and Recycling of Zinc. Zinc Experts Meeting 2014 GDMB. Leende, Holland, 2014
Pichler C., G. Schneeberger und J. Antrekowitsch: Treatment and Application of slags from Recycling Process of Metal Industry Residues. EMC, Weimar, Deutschland, 2013
Rösler G. und J. Antrekowitsch: Sustainable Carbonization of Iron Bath by Utilization of Renewable Bio-Char. EMC, Weimar, Deutschland, 2013
Rumpold R. und J. Antrekowitsch: Removal of Halogens in Heavy Metal containing Flue Dust from the Secondary Copper Production. EMC, Weimar, Deutschland, 2013
Unger A., S. Steinlechner und J. Antrekowitsch: Zinc oxide quality upgrade by a clinkering process obtained from recycling of secondary resources. Recycling of Non-Ferrous metals, Krakau, Polen, 2013
Unger A., G. Schneeberger, C. Pichler und J. Antrekowitsch: Investigations on a recycling process for residues from steel industry. microCad International Scientific Conference, Miskolc, Ungarn, 2013
Unger A. und J. Antrekowitsch: Reforming of a Zinc Containing Gas Mixture with Steam for the Generation of ZnO and H2. EMC, Weimar, Deutschland, 2013
Antrekowitsch J.: Amelioration of Secondary Zinc Oxide, Part I. International Zinc Conference and 2013 Zinc Oxide Industry Conference, Cancun, 2013
Antrekowitsch J.: Recovery of Zinc and Iron from Steel Mill Dusts by the use of a TBRC. A possible Mini-mill Solution?. REWAS, San Antonio 2013
Antrekowitsch J.: Zinc, Lead and Silver Recycling from Complex Residues, Recycling Metals from Industrial Waste. Colorado School of Mines, Golden, 2013
Antrekowitsch J.: The Potential of Lead Recycling from Steel Mill Residues. 3rd Secondary Lead Conference, Singapur 2013
Steinlechner S. und J. Antrekowitsch: PGM recycling from catalysts in a closed hydrometallurgical loop with an optional cerium recovery. REWAS TMS 2013, San Antonio, USA, 2013
Antrekowitsch J. und C. Pichler: Status of the two step process for the recycling of EAF-dusts. 61st Zinc Experts Committee Meeting, Leoben, 22 – 23 October 2013
Rumpold R. und J. Antrekowitsch: Zinc in the copper secondary production and potential recycling technologies. Copper 2013, Santiago, Chile, S. 265 – 280
Schneeberger G., J. Antrekowitsch und C. Pichler: Die Verwertung von Hüttenreststoffen aus der Eisen- und Stahlindustrie mit Schwerpunkt Filterstäube. Das XII. Internationale Symposium Entschwefelung von Roheisen und Stahl, Almamet GmbH, 19.-22. September, Wien, Österreich, 2012
Antrekowitsch J.: Optimierungspotenziale bei Recycling von Schwermetallen. Cleantech Innovators Club, ECO World Styria, TU Graz, Austria, 2012, Graz, Austria.
Antrekowitsch J.: Effizientes Recycling von Reststoffen der metallerzeugenden Industrie. Der Weg zum Zero-Waste-Verfahren, Tag der Metallurgie, 2012, Goslar, Germany.
Antrekowitsch J.: Energieeffizientes Metallrecycling, Simultane Rückgewinnung von Wertmetallen aus Reststoffen. Science Brunch, FFG, Klima und Energiefond, bm vit, 2012, Linz, Austria
Antrekowitsch J.: Optimization Potentials in the recycling of complex industrial wastes. Institute of energy and technology, energy science center, ETH Zürich, 2012, Zürich, Switzerland
Antrekowitsch J.: Future perspectives in the recycling of complex residues. Recycling-Fachausschuss, Austrian Society of Metallurgy, 2012, Leoben, Austria
Antrekowitsch J.: Process Development in the Recycling of metal containing industrial Wastes. PSU-IC 2012 Conference, Songkhla, Thailand, 2012
Antrekowitsch J.: Optimierungspotentiale beim Recycling schwermetallhaltiger Rückstände. Berliner Recycling und Rohstoffkonferenz, Berlin, Germany, 2012.
Agirre Arisketa I., T. Griessacher, A. Adrados, J. Requies, J. Cambra und J. Antrekowitsch: Catalytic upgrading of biomass pyrolysis vapors to bio-syngas, a possible reducing agent for metallurgical processes. 4th International Conference on Engineering for Waste and Biomass Valorisation, Porto, Portugal, 2012
Agirre Arisketa I., T. Griessacher, G. Rösler und J. Antrekowitsch: A Sustainable Process Development for Biomass Conversion into Charcoal for Metallurgical Processes. BIT´s 2nd Annual World Congress of Bioenergy, Xi’an, China, 2012.
Antrekowitsch J.: Melting Behavior Of Complex Zinc Containing Residues. International Symposium on Metals and Materials Processing in a Clean Environment (Fray Symposium), Cancun, Mexiko, 2011
Antrekowitsch J.: New Perspectives in the Recycling of Dusts from Integrated Steel Mills. EMC, Düsseldorf, Deutschland, 2011
Antrekowitsch J.: Marktfähigkeit und alternative Einsatzbereiche von technischem Zinkoxid aus der Aufarbeitung von Stahlwerksreststoffen. Logistik in Leoben – Vernetzung von Praxis, Forschung und Lehre, Leoben, Österreich, 2010
Antrekowitsch J.: Characterization of Zinc Containing Residues from Copper and Zinc Industry. XXIV. microCad International Scientific Conference, Miskolc, Ungarn, 2010
Antrekowitsch J.: Characterization of Zinc Containing Residues from Nonferrous Industry. 49th Annual Conference of Metallurgists (COM 2010), Vancouver, Kanada, 2010
Antrekowitsch J.: Evaluation and Recycling Potential of Different Zinc Containing Residues from Metallurgical Industry. 49th Annual Conference of Metallurgists (COM 2010), Vancouver, Kanada, 2010
Antrekowitsch J.: Aktuelle Entwicklungen in der Aufarbeitung zinkhältiger Reststoffe aus der Stahl- und Nichteisenmetallurgie. 10. Recyclingfachausschuss der ASMET, Leoben, Österreich, 2009
Antrekowitsch J.: Complex Heavy Metal Containing Wastes: Between Landfilling and Recycling. EMC, Innsbruck, Österreich, 2009
Antrekowitsch J.: Forschung im Bereich der Vernetzung von Zink und Stahl an der NE-Metallurgie der Montanuniversität Leoben. 2. Seminar – Vernetzung von Zink und Stahl, Leoben, Österreich, 2009
Antrekowitsch J.: Developments in the Recycling of Heavy-Metal-Containing Wastes – Projects at the Department of Nonferrous Metallurgy/University of Leoben. GDMB´s Zinc-Experts-Meeting, Kokkola, Finnland, 2009
Antrekowitsch J.: The current status of recycling of electric arc furnace dusts and perspectives for the future. XXIII. microCAD International Scientific Conference, Miskolc, Ungarn, 2009
Antrekowitsch J.: Fusion behaviour of zinc bearing steel mill dusts. 56th GDMB’s Zinc Experts Committee Meeting, Cagliari, Italien, 2008
Antrekowitsch J.: Verhalten von Zinkverbindungen und Halogenen bei der Entstehung und Verarbeitung von Stahlwerksstäuben. Sitzung des Ausschusses für metallurgische Grundlagen des VDEh, Düsseldorf, Deutschland, 2008
Antrekowitsch J.: Behaviour of complex Residues from Steel Industry during Smelting and Reduction. microCAD 2008 International Scientific Conference, Miskolc, Ungarn, 2008
Antrekowitsch J.: Zinc Oxide from Recycling Processes as a Source for Electrolytic Galvanising. REWAS, Cancun, Mexiko, 2008
Antrekowitsch J.: Characterization of Zinc Containing Residues from Metallurgical Processes. REWAS, Cancun, Mexiko, 2008
Antrekowitsch J.: The behavior of iron and zinc containing slags on an inductively heated coke bed. EMC, Düsseldorf, Deutschland, 2007
Antrekowitsch J.: Present Status of the Reco Dust Process for the Recycling of Zinc containing Steel Mill Dusts. Zinc Experts Meeting, Düsseldorf, Deutschland, 2006
Antrekowitsch J.: Inducarb – A new reducing Facility for various Oxidic. Sohn International Symposium (2006), San Diego, Californien, USA
Antrekowitsch J.: Recycling of Platinum from spent Catalysts. Sohn International Symposium (2006), San Diego, Californien, USA
Antrekowitsch J.: Problemstellungen und Lösungsansätze in der Aufarbeitung zinkhältiger Stahlwerksstäube. Vernetzung von Zink und Stahl. 42. Metallurgisches Seminar der GDMB (2006), Leoben, Österreich
Antrekowitsch J.: Processing of residues by a new developed Flash-Reactor. microCAD 2005 (2005). Miskolc, Ungarn
Antrekowitsch J.: Tribovent Verfahrensentwicklung Ges.m.b.H – Verfahren, Projekte & Konzepte. Recycling Fachausschuss (2005). Untervaz, Schweiz
Antrekowitsch J.: Tribovent Technologies for the Treatment of Steel-Mill Residues. 5th Asian Steel Conference (2005). Mumbai (Bombay), Indien
Antrekowitsch J.: Fluor und Chlorproblematik bei der Aufarbeitung von zinkhältigen Reststoffen. Fachausschusstagung STAHL (2004), Leoben, Österreich
Antrekowitsch J.: Pyrometallurgische Aufarbeitung von Reststoffen in einem Flash-Reaktor. Depotech (2004), Leoben, Österreich
Antrekowitsch J.: Die Situation der Stahlwerksstaubaufarbeitung im deutschsprachigen Raum. Recyclingfachausschuss Stahl, ASMET (2003), Leoben, Österreich
Antrekowitsch J.: A new concept for the recycling of steel mill dust. Zink-Fachausschuss der GDMB (2003), Leipzig, Deutschland
Antrekowitsch J.: Dezincing of steel scrap. A solution for the zinc-iron problem in steel industry. EMC (2003), Hannover, Deutschland
Antrekowitsch J.: Recycling zinkhältiger Stahlwerksstäube: Forschung zwischen Stahl- und Nichteisenmetallurgie. Institutskolloquium (2003)
Antrekowitsch J.: Recovery of Zinc and Iron from EAF Steel Mill Dusts with Special Focus on Halogen and Residues. M³ Internat. Congress on European Perspectives in Mining and Metallurgy (2002), Wien, Österreich
Posters
Antrekowitsch J. and W. Schatzmann: Recycling of industrial by-products: Activities within EIT RawMaterials and the Resources Innovation Center. ESEE DC Conference, Leoben, Österreich, 2019
Antrekowitsch J.: Christian Doppler Labor Recycling von Schwermetallen. WerWasWo.Forschung@MUL, Leoben, Österreich, 2017
Benigni, C., C. Pichler und J. Antrekowitsch: Effects of calcium oxide on the washing behaviour of secondary zinc oxides. Conference Hydrometallurgy 2016, Capetown, South Africa, 01.08.-03.08.2016
Griessacher T., G. Rösler und J. Antrekowitsch: Detailed Investigations in Charcoal Qualities and Structures. 20th European Biomass Conference and Exhibition, Mailand, Italien, 2012
Rösler G., T. Griessacher, I. Agirre Arisketa und J. Antrekowitsch: Charcoal production for metallurgical processes with special focus on structural properties. International Conference on Engineering for Waste and Biomass Valorisation, Porto, Portugal, 2012
Rösler G., T. Griessacher und J. Antrekowitsch: The influence of charcoal properties on its applicability in metallurgical operations. 4th International Symposium on Energy from Biomass and Waste, Venedig, Italien, 2012
Antrekowitsch J., S. Steinlechner und T. Griessacher: Simultaneous Recovery of Valuable Metals from Wastes with Reducing Metal Bath Technologies. TMS 2011 140 th TMS Annual Meeting & Exhibition, San Diego, USA, 2011
Antrekowitsch J. und S. Steinlechner: Optimization in the Recycling of Zinc Containing Industrial Residues. Earth2011 – The 11th International Symposium on East Asia Resource Recycling Technology, Kaohsiung, Taiwan, 2011
Antrekowitsch J., T. Griessacher, S. Steinlechner, G. Schneeberger und R. Rumpold: Möglichkeiten zur Optimierung beim Recycling zinkhältiger Rückstände. Forum für Metallurgie und Werkstofftechnik, Leoben, Österreich, 2011
Antrekowitsch J., T. Griessacher und S. Steinlechner: Optimization in Recycling of Zinc Containing Residues. 1st International Conference on WASTES: Solutions, Treatments and Opportunities (2011), Guimaraes, Portugal
Steinlechner S. und J. Antrekowitsch: Concepts for the SImultanous Recovery of Valuable Metals from Zinc Bearing Residues. Earth2011 – The 11th International Symposium on East Asia Resource Recycling Technology, Kaohsiung, Taiwan, 2011
Griessacher T. und J. Antrekowitsch: Charcoal from Biomass – A Sustainable Reductant. 3rd International Conference on Engineering for Waste and Biomass Valorisation, Peking, China, 2010
Antrekowitsch J. und S. Steinlechner: Potential of hydrogen as alternative reducing agent in metallurgical processes. 3rd International Conference on Engineering for Waste and Biomass Valorisation, Peking, China, 2010
Antrekowitsch J., H. Schnideritsch, T. Griessacher, S. Steinlechner und G. Schneeberger: Aktivitäten der Nichteisenmetallurgie am Zinksektor. Forum für Metallurgie und Werkstofftechnik, Leoben, Österreich, 2010
Antrekowitsch J., D. Offenthaler, H. Schnideritsch, T. Griessacher und S. Steinlechner: Activities of the zinc group at the department of nonferrous metallurgy. EMC, Innsbruck, Österreich, 2009
Offenthaler D., J. Antrekowitsch und A. Edlinger: RecoDust – Ein neues Recycling-Konzept für Stahlwerksstaub. Forum für Metallurgie und Werkstofftechnik, Leoben, Österreich, 2006
Antrekowitsch J.: Inducarb – Anew reducing facility for various oxidic melts. DepoTech, Leoben, Österreich, 2006
Antrekowitsch J. und D. Offenthaler: Flash-Reacting – A new concept for smelting. 5th Asian Steel Conference, Mumbai, Indien, 2005
Antrekowitsch J. und D. Offenthaler: RecoDust – A new step in steelmill-dust recycling. 5th Asian Steel Conference, Mumbai, Indien, 2005
Antrekowitsch J.: Die Fluor- und Chlorproblematik in der Aufarbeitung zinkhältiger Reststoffe. WerWasWo.Forschung@MUL, Leoben, Österreich, 2004